HP V1910 User Manual page 132

Create an SNMP view (2)
c.
Table 25 Configure the parameters of a rule and click Add to add the rule into the list box at the lower part
of the page.
Table 26 Configure all rules and click Apply to create an SNMP view. Note that the view will not be created
if you click Cancel.
Configuration items for creating an SNMP view
2.
Item
View Name
Rule
MIB Subtree OID
Subtree Mask
Adding rules to an SNMP view
Table 27 Click the
the view ViewDefault window appears as shown in b.
Table 28 Configure the parameters, and click Apply to add the rule for the view.
configuration items for creating an SNMP view.
Description
Set the SNMP view name.
Select to exclude or include the objects in the view range determined by the MIB
subtree OID and subtree mask.
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system).
MIB subtree OID identifies the position of a node in the MIB tree, and it can uniquely
identify a MIB subtree.
Set the subtree mask.
If no subtree mask is specified, the default subtree mask (all Fs) will be used for
mask-OID matching.
icon corresponding to the specified view on the page as shown in a, the Add rule for
120
2 describes the