HP V1910 User Manual page 254

The Global Setup tab
d.
Select Enable from the LLDP Enable drop-down list.

Click Apply.

Table 62 Configure Switch B
# Enable LLDP on port GigabitEthernet 1/0/1. (Optional. By default, LLDP is enabled on Ethernet ports.)
# Set the LLDP operating mode to Tx on GigabitEthernet 1/0/1.
Select Network  LLDP from the navigation tree to enter the Port Setup tab, as shown in e. Click the

icon for port GigabitEthernet 1/0/1. The page shown in
The Port Setup tab
e.
f is displayed.
242