Configuration Guidelines - HP V1910 User Manual

Click Modify Port to enter the page for modifying the VLANs to which a port belongs, as shown in g.
Assign GigabitEthernet 1/0/1 to VLAN 2 and VLANs 6 through 50 as a tagged member
g.
 Select GigabitEthernet 1/0/1 on the chassis front device panel.
 Select the Tagged option in the Select membership type area.
 Type VLAN IDs 2, 6-50.
 Click Apply. A configuration progress dialog box appears.
 After the configuration process is complete, click Close in the dialog box.
Table 45 Configure Switch B
Configure Switch B as you configured Switch A.

Configuration guidelines

When configuring the VLAN function, follow these guidelines:
As the default VLAN, VLAN 1 cannot be created or removed.

You cannot create or remove VLANs reserved for special purposes.

Dynamic VLANs cannot be removed on the page for removing VLANs.

You cannot remove a VLAN that has referenced a QoS policy.

To remove a remote probe VLAN for remote port mirroring, you must remove the remote probe VLAN

configuration first.
148