HP V1910 User Manual page 324

# Create VLAN-interface 100.
Select Network  VLAN Interface from the navigation tree, click the Create tab, and then perform the

following operations, as shown in d.
Create VLAN-interface 100
d.
Type 100 for VLAN ID.

Select the Configure Primary IPv4 Address checkbox.

Click on the Manual radio botton.

Type 192.168.1.2 for IPv4 Address.

Select 24 (255.255.255.0) for Mask Length.

Click Apply to complete the configuration.

# Create a static ARP entry.
 Select Network  ARP Management from the navigation tree to enter the default ARP Table page.
Click Add Perform the following operations, as shown in e.
312