Authorized Ip Configuration Example - HP V1910 User Manual

Authorized IP configuration example

Authorized IP configuration example
Network requirements
In a, configure Switch to deny Telnet and HTTP requests from Host A, and permit Telnet and HTTP requests
from Host B.
Network diagram for authorized IP
a.
Configuration procedure
# Create an ACL.
Select QoS  ACL IPv4 from the navigation tree and then click the Create tab to enter the ACL

configuration page shown in a.
 Type 2001 for ACL Number.
 Click Apply.
Create an ACL
a.
# Configure an ACL rule to permit Host B.
Click the Basic Setup tab to enter the page shown in b.

407