Energy Saving Configuration; Overview; Configuring Energy Saving On A Port - HP V1910 User Manual

Energy saving configuration

Overview

Energy saving allows you to configure a port to work at the lowest transmission speed, disable PoE, or go
down during a specified time range on certain days of a week. The port resumes working normally when
the effective time period ends.

Configuring energy saving on a port

Select Device  Energy Saving from the navigation tree to enter the energy saving configuration page, as
shown in a. You can select a port and configure an energy saving policy for the port.
Energy saving configuration page
a.
Configuration items for configuring energy saving on a port
2.
Item
Time Range
Sun through Sat
PoE Disabled
Description
Set the time period when the port is in the state of energy saving.
IMPORTANT:

Up to five energy saving policies with different time ranges can be configured on
a port.

Specify the start time and end time in units of 5 minutes, such as 08:05 to 10:15.
Otherwise, the start time will be postponed and the end time will be brought
forward so that they meet the requirements. For example, if you set the time range
to 08:08 to 10:12, however, the effective time range is actually 08:10 to 10:10.
Disable PoE on the port.
113