Network diagram for IGMP snooping configuration
a.
Configuration procedure
Table 65
Configure IP addresses
Configure the IP address for each interface as per a. The detailed configuration steps are omitted.
Table 66
Configure Router A
Enable IP multicast routing, enable PIM-DM on each interface, and enable IGMP on Ethernet 1/1. The
detailed configuration steps are omitted.
Table 67
Configure Switch A
# Create VLAN 100 and add GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 to VLAN 100.
Select Network VLAN in the navigation tree and click the Create tab to enter the configuration page
shown in b.
260