The page for configuring a rule for an Ethernet frame header ACL
describes the configuration items for creating a rule for an Ethernet frame header IPv4 ACL.
Configuration items for an Ethernet frame header IPv4 ACL rule
Select Access Control List (ACL)
Select the Ethernet frame header IPv4 ACL for which you want to configure
Available ACLs are Ethernet frame header IPv4 ACLs that have been
Select the Rule ID option and type a number for the rule.
If you do not specify the rule number, the system will assign one
Select the operation to be performed for packets matching the rule.
Permit—Allows matched packets to pass.
Deny—Drops matched packets.
Select the Source MAC Address option and type a source MAC address and
Select the Destination MAC Address option and type a destination MAC
address and a mask.