802.1X-Related Protocols; Packet Formats - HP V1910 User Manual

Authorized/unauthorized state of a controlled port
a.
In the unauthorized state, a controlled port controls traffic in one of the following ways:
Performs bidirectional traffic control to deny traffic to and from the client.

Performs unidirectional traffic control to deny traffic from the client.

NOTE:
The HP devices support only unidirectional traffic control.

802.1X-related protocols

802.1X uses the Extensible Authentication Protocol (EAP) to transport authentication information for the
client, the network access device, and the authentication server. EAP is an authentication framework that
uses the client/server model. It supports a variety of authentication methods, including MD5-Challenge,
EAP-Transport Layer Security (EAP-TLS), and Protected EAP (PEAP).
802.1X defines EAP over LAN (EAPOL) for passing EAP packets between the client and the network access
device over a wired or wireless LAN. Between the network access device and the authentication server,
802.1X delivers authentication information in one of the following methods:
 Encapsulates EAP packets in RADIUS by using EAP over RADIUS (EAPOR), as described in
relay".
Extracts authentication information from the EAP packets and encapsulates the information in standard

RADIUS packets, as described in
NOTE:
If an 802.1X client uses EAP, the configuration on username format on the device does not take effect. For
more information about username format configuration, see the chapter "RADIUS configuration".

Packet formats

EAP packet format
a shows the EAP packet format.
"EAP termination".
321
"EAP