HP V1910 User Manual page 350

Enter the primary server IP address 10.1.1.2.

Select active as the primary server's status.

Enter the secondary server IP address 10.1.1.1.

Select active as the secondary server's status.

 Click Apply to finish the operation.
# Configure the scheme used for communication between the device and the RADIUS servers.
Select the RADIUS Setup tab to enter the RADIUS parameter configuration page.

RADIUS parameter configuration
f.
Select extended as the server type.

Select the Authentication Server Shared Key checkbox, and enter name in the textbox.

Enter name again in the Confirm Authentication Shared Key textbox.

Select the Accounting Server Shared Key checkbox, and enter money in the textbox.

Enter money again in the Confirm Accounting Shared Key textbox.

Enter 5 in the Timeout Interval textbox

Enter 5 in the Timeout Retransmission Times textbox.

Enter 15 in the Realtime-Accounting Interval textbox.

Click Apply to finish the operation.

Table 116 Configure AAA
# Create an ISP domain.
From the navigation tree, select Authentication  AAA. The domain setup page appears.

338