Checking The Scanner; Uploading New Applications - Psion Teklogix 7535 User Manual

encrypted packet and forwards an authentication response packet back to
the 7535 radio, indicating the success or failure of the decryption. If the
packet is successfully encrypted/decrypted, the user is authenticated.
If this option is disabled (the default setting), network authentication is
not used.
EAP (Extensible Authentication Protocol) and Enable 802.1x
"802.1x" is the IEEE standard that offers additional security for local area
networks. It provides authentication for user devices attached to an Ethernet
network, whether wired or wireless. A packet encapsulated in an "EAP" is
used in conjunction with the "802.1x" standard to authenticate users at the
MAC layer.
Available EAPs are listed in the dropdown menu next to the
To enable "802.1x", press <TAB> to highlight
<SPACE> key to enable (√) it.

2.5 Checking The Scanner

If your 7535 is equipped with an internal scanner, it will successfully decode most
1D bar codes as delivered. Press the SCAN button and check for a valid decode on
any UPC bar code. If desired, set the "Dot Time" parameter to zero in the 'Teklogix
Scanners' applet in the
Performance is improved if you disable all unneeded bar codes under the 'Bar
Codes' dialogue screen. Review "Scanner Properties" on page 86 for details about
bar codes.

2.6 Uploading New Applications

The simplest way to upload Windows CE.net applications into the 7535 is to use a
PDM with a USB equipped PC. Refer to "Portable Docking Module (PDM)" on
page 219 for more details about the PDM.
• Attach the supplied USB cable between the host port on your PC and the
PDM 'device' port.
• Install the PDM on the 7535 and turn it on.
Control Panel
to turn off the default aiming dot.
Chapter 2: Unpacking & Basic Checkout
'Enable 802.1x'
Teklogix 7535 Hand-Held Computer User Manual

Checking The Scanner

'EAP'
option.
, and press the
29