Telescopic Rail Runner Assembly - Polycom 2000 Hardware Manual

RealPresence®Collaboration Server (RMX) 2000 Hardware Guide
Rail Runners Kit Contents
Part/Kit no.
Rack spacer assembly kit
Rail runner assembly kit
RMX chassis assembly kit

Telescopic Rail Runner Assembly

Rack Rail Runners require a minimum of 48cm and a maximum of 80cm within the rack for installation.
1 Determine the location of the RMX on the rack:
 Allow for a 1U gap above and below the system for ventilation.
 Use the Rack Spacer (3) to predetermine its position on the rack post, making sure that square
studs of the spacer fit into the rack post's square/rounded mounting holes. Mark the spacer's
location on the rack post. Repeat this process for the 3 remaining vertical posts ensuring that the
system can be horizontally seated.
Polycom, Inc.
Item
Rack spacer
Flat head screw - M5*10mm
Flat head screw - M3*8mm
Flat washer M3
Nut spring M3
Pan head screw - M5*12mm
Flat washer M5
Item Item Sample
no.
3 Front & Rear
4
5
6
7
8
9
Item
Quantity
4
8
4
4
4
2
2
22