Polycom 2000 Hardware Manual page 29

RealPresence®Collaboration Server (RMX) 2000 Hardware Guide
LAN1*, LAN3 and the 10/100Mb ShMG ports shall not be used and the plastic caps covering those
ports should not be removed.
* With Multiple networks and LAN redundancy configurations, LAN 1 port is used. For more
information, see RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrators
Guide Administrator's Guide,
RMX 2000 RTM IP Rear Panel Layout
The following items appear on the RMX 2000 rear panel.
RMX 2000 Rear Panel - RTM IP Component Description
Item
LAN 1
LAN 2
LAN 3
10/100 ShMG
Serial
USB
Standby button
Polycom, Inc.
LAN Redundancy
Description
NA - Disconnected. LAN 1 is covered with a plastic cap that should not be removed.
Used for the Network connection.
For Remote Access only using the Alternate Management Network.. For more information,
see the RealPresence® Collaboration Server 1500, 1800, 2000, 4000 Administrator's
Guide, Appendix G:
Note: When not in use, LAN 3 is covered with a plastic cap that should not be removed.
NA - For debugging purposes only.
Note: 10/100 ShMG is covered with a plastic cap that should not be removed.
NA - For debugging purposes only.
USB key connection. For more information, see the RealPresence Collaboration Server
1500/1800/2000/4000 Getting Started Guide, First Time Installation and Configuration on
page 2-1.
Toggle between ON/OFF and standby. Use this button to either perform Diagnostics or
Software Recovery on the RealPresence Collaboration Server (RMX)
1500/1800/2000/4000 Administrators Guide after turning the system ON.
Short press (2 seconds) - MPMx Diagnostics.
Long press - (10 seconds) Media and RTM IP Software Recovery.
and Multiple Network Services .
29