Realpresence Collaboration Server (Rmx) 2000 Components; Realpresence Collaboration Server (Rmx) 2000 Front Panel - Polycom 2000 Hardware Manual

RealPresence®Collaboration Server (RMX) 2000 Hardware Guide
RealPresence Collaboration Server (RMX) 2000
Components
On the RMX 2000 components are located on both the front and rear of the MCU.
Please verify the type of chassis used on your RMX 2000. Starting with version 4.0, a new
environmentally friendly RMX 2000 chassis is in use. For more information, contact your next level of
support.

RealPresence Collaboration Server (RMX) 2000 Front Panel

The front panel provides access to the RMX 2000 main CNTL modules, MPMx/MPMRx modules, Power
Supply drawer, Status LEDs, and Fans.
.
RMX 2000 Front Panel
RMX 2000 Component Description
Component
CNTL (CPU) Module
Power Supply Drawer
Fan Drawer
Polycom, Inc.
Description
The CNTL module controls and manages the RMX 2000. The CNTL module has
an ComExpress Pentium-M 1.4GHz processor, a 40GB hard disk drive, 1GB
Compact Flash and 1GB of DDR RAM.
The Operating System is Linux.
The Power Supply drawer is located below the MPMx/MPMRx Cards and is
connected to the backplane by means of a power connector. It operates at
100-240 volts AC 50/60 Hz, and provides +48VDC 700W output with built-in load
sharing capabilities.
Three fans are mounted sideways in a drawer. Airflow is from right to left, and out
the side of the MCU. The drawer is connected to the Back-plane by a connector.
27