Configuring The Smart Card; Configure Smart Card Authentication - Xerox AltaLink B8045 Installation And Configuration Manual

Installation

Configuring the Smart Card

After the Smart Card feature is enabled on the device, you can use Internet Services to configure the
Smart Card.

Configure Smart Card Authentication

To enable and configure the Smart Card:
1. In the Internet Services Login/Permissions/Accounting menu, click Login Methods.
2. Enter the Domain Controller details for the authentication server.
a. Click Domain Controllers – Edit from the Configuration Settings list.
Note
Initially the Domain Controllers are empty and the NTP server is not set.
b. Click Add Domain Controller.
c. Select the Windows Based Domain Controller check box. Or, to select the Linux-Based Domain
Controller, clear the check box.
3-10 Xerox
Smart Card Installation and Configuration Guide
® AltaLink ® Series