Selecting Vfo/Memory Mode; D Differences Between Vfo Mode And Memory Mode - Icom IC-7200 Instruction Manual

3
BASIC OPERATION

■ Selecting VFO/memory mode

V/M
➥ Push to toggle between VFO and memory
➔
modes.

D Differences between VFO mode and memory mode

VFO MODE
Each VFO shows a frequency and operating mode.
If the frequency or operating mode is changed, the
VFO automatically memorizes the new frequency or
operating mode.
When the VFO is selected from another VFO or
memory mode, the last used frequency and operat-
ing mode for that VFO appears.
[EXAMPLE]
Changed frequency (14.123 MHz) appears.
23
VFO is selected.
The frequency is
changed.
Memory mode is
selected.
VFO is selected
again.
MODE
TUNER
FILTER
MEMORY MODE (pgs. 61–64)
Each memory channel shows a frequency and op-
erating mode like a VFO. Even if the frequency or
mode is changed, the memory channel does not
memorize the new frequency or operating mode.
When the memory channel is selected from another
memory channel or VFO mode, the memorized
frequency and operating mode appear even if the
memory channel settings, frequency and mode, are
changed before selecting another memory channel
or VFO mode.
[EXAMPLE]
Changed frequency (14.123 MHz) does not appear and
memorized frequency (14.100 MHz) appears instead.
NB NR ANF
METER
V/M 1 A/B 2 3
SPLIT
1.8 = 3.5 7
4 5 6
MW M-CL AGC
10 14 18
7 8 9
COMP SCAN VOX
21 24 28
.
TS
0
MNF F-INP ENT
RIT
GENE
50
BAND
P.AMP
ATT
M-CH/RIT
SPCH
SET
Memory channel 1
is selected.
The frequency is
changed.
Another memory
channel is selected.
Memory channel 1
is selected again.