Selecting Vfo/Memory Mode; Vfo Operation - Icom IC-746PRO Instruction Manual

Selecting VFO/memory mode

VFO is an abbreviation of Variable Frequency Oscilla-
tor, and traditionally refers to an oscillator.
Push [V/M] to switch between VFO and memory
modes.
• Pushing [V/M] for 1 sec. transfers the contents of the se-
lected memory channel to VFO mode (p. 65).

VFO operation

The transceiver has 2 VFOs and are called VFO A and
VFO B. You can use the desired VFO to call up a fre-
quency and operating mode for your operation.
D Selecting the VFO A/B
Push [A/B] to switch between the VFO A and
VFO B.
• "VFO A" or "VFO B" appears.
D VFO equalization
Push [A/B] for 1 sec. to equalize the undisplayed
VFO condition to the displayed VFO.
• 3 beeps sound when the VFO equalization is completed.
CONVENIENT
Use two VFOs as a quick memory
When you find a new station, but you wish to continue
searching, the Two VFO system can be used for quick mem-
ory storage.
q Push [A/B] for 1 sec. to store the displayed frequency into
the undisplayed VFO.
w Continue to searching for stations.
e Push [A/B] to retrieve the stored frequency.
r To continue searching for station, push [A/B] again.
BASIC OPERATION
Either one is appears
Push
3
[V/M]
[A/B]
for 1 sec.
A /B
20