Icom IC-7200 Instruction Manual page 86

10
SET MODE
■ Set mode (Continued)
Mode Select (SSB)
This item inhibits the selection of SSB (LSB/USB)
modes, and allows you to simplify operation.
For example if you are operating mobile and only plan on
using AM mode, set all other modes (SSB, CW, RTTY) to
OFF, thereby making selection of AM quick and easy.
on : SSB modes are selectable.
oF : SSB modes are inhibited.
Mode Select (CW)
This item inhibits the selection of CW/CW-R modes, and
allows you to simplify operation.
on : CW modes are selectable.
oF : CW modes are inhibited.
Mode Select (RTTY)
This item inhibits the selection of RTTY/RTTY-R modes,
and allows you to simplify operation.
on : RTTY modes are selectable.
oF : RTTY modes are inhibited.
Mode Select (AM)
This item inhibits the selection of AM mode, and allows
you to simplify operation.
on : AM modes are selectable.
oF : AM modes are inhibited.
CI-V Baud Rate
Sets the CI-V data transfer rate. 300, 1200, 4800, 9600,
19200 bps and Auto are available.
When Auto is selected, the baud rate is automatically set
according to the connected controller or remote controller.
81
ON (default)
ON (default)
ON (default)
ON (default)
Auto (default)