Displaying And Maintaining An Ethernet Interface - HP 4800G Series Configuration Manual

24/48 port
Table of Contents

Advertisement

To do...
Specify to send log when the
traffic detected exceeds the
upper threshold or drops down
below the lower threshold from
a point higher than the upper
threshold
For network stability sake, configure the interval for generating traffic statistics to a value that is not
shorter than the default.
The storm constrain function, after being enabled, requires a complete statistical period (specified
by the storm-constrain interval command) to collect traffic data, and analyzes the data in the next
period. Thus, it is normal that a period longer than one statistic period is waited for a control action
to happen if you enable the function while the packet storm is present. However, the action will be
taken within two periods.
The storm constrain function is applicable to multicast packets, and broadcast packets; and you
can specify the upper and lower threshold for any of the three types of packets.

Displaying and Maintaining an Ethernet Interface

To do...
Display the current state of an
interface and the related
information
Display the summary of an
interface
Display information about
discarded packets on an
interface
Display summary information
about discarded packets on all
interfaces
Clear the statistics of an
interface
Clear the statistics of discarded
packets on an interface
Display the Combo ports and
the corresponding
optical/electrical ports
Use the command...
storm-constrain enable log
Use the command...
display interface
[ interface-type
[ interface-number ] ]
display brief interface
[ interface-type
[ interface-number ] ] [ | { begin
| exclude | include }
regular-expression ]
display packet-drop interface
[ interface-type
[ interface-number ] ]
display packet-drop
summary
reset counters interface
[ interface-type
[ interface-number ] ]
reset packet-drop interface
[ interface-type
[ interface-number ] ]
display port combo
1-11
Remarks
Optional
By default, the system sends
log when the traffic detected
exceeds the upper threshold or
drops down below the lower
threshold from a point higher
than the upper threshold.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Available in any view

Advertisement

Chapters

Table of Contents
loading

Table of Contents