Table of Contents
Advertisement
Preparing for Printing
D
Click the [Change Accessories] tab.
If options in the [Change Accessories] tab are disabled, bidirectional connection
is enabled. In this case, no change is necessary for option settings.
If you are using the RPCS printer driver, click the [Change Accessories] tab.
1
If you are using the PS printer driver, click the [Device Settings] tab.
E
Select options installed from the [Option] area, and then make the necessary
settings.
F
Select the total amount of the memory in [Total memory:], when the optional
SDRAM module is added.
G
Under [Paper source tray settings:], click and highlight the tray to be used, and
then select the appropriate size, position, and type for the tray. Select the
[Tray locking] check box to exclude the tray from the targets of automatic tray
selection.
H
Click [OK] to close the printer properties dialog box.
52
Advertisement
Table of Contents
