Savin MLP145 Operating Instructions Manual page 233

Messages
Full: Finisher Shift Tray 1, 2
Full: Finisher Upper Tray
Full: Hole Punch Receptacle
Full: Standard Tray
Full: Waste Toner
Hex Dump Mode
Immed. Trans. not connected
Immediate Transmission Failed
In Use: Finisher
In Use: Input Tray
In Use: Staple Unit
Jobs Suspended
Independent-supplier Toner
Key Card not inserted
Key Card/Counter not inserted
Key Counter not inserted
Loading Toner...
Low: Black Toner
Low: Toner
Malfunction: Booklet Processor
Malfunction: Duplex Unit
Malfunction: Ext. Charge Unit
Malfunction: Finisher
Malfunction: LargeCapacity Tray
Malfunction: Output Tray
Malfunction: Punch Unit
Malfunction: Staple Unit
Malfunction: Tray 1
Malfunction: Tray 2
Malfunction: Tray 3
Malfunction: Tray 4
Getting Printer Information over the Network
Description
The shift tray 1 and 2 of Finisher are full.
The upper tray of Finisher is full.
Punch Chip receptacle for hole punch is full.
The output paper tray is full.
Waste toner is full.
It is a hex dump mode.
It did not connect directly with the other party
of the transmission.
An error has occurred while transmitting di-
rectly.
Other functions is using Finisher.
Other functions is using the input tray.
Other functions is using the staple unit.
All jobs are suspended.
Toner that is not recommended is set.
The printer is waiting for key card to be insert-
ed.
The printer is waiting for key card or key
counter to be inserted.
The printer is waiting for key counter to be left
in it.
Toner is being supplied.
The black toner cartridge is not set correctly, or
toner is almost running out.
The black toner cartridge is not set correctly, or
toner is almost running out.
There is a problem with booklet finisher.
There is a problem with duplex unit.
There is a problem with external charge unit.
There is a problem with Finisher.
There is a problem with LargeCapacity tray.
There is a problem with output tray.
There is a problem with Punch Unit.
There is a problem with the staple unit.
There is a problem with tray 1.
There is a problem with tray 2.
There is a problem with tray 3.
There is a problem with tray 4.
5
221