Savin MLP145 Operating Instructions Manual page 264

Using a Printer Server
H
Set up the network connection to a printer. Select the object in which the
printer is located, and then click [Create] on the [Object] menu.
I
In the [Class of new object] box, click [Printer], and then click [OK]. For Net-
Ware 5, click [Printer (Non NDPS)].
J
In the [Printer name] box, enter the printer name
K
Select the [Define additional properties] check box, and then click [Create].
L
Assign print queues to the created printer. Click [Assignments], and then
click [Add] in the [Assignments] area.
M
In the [Available objects] box, click the queue you created, and then click [OK].
N
Click [Configuration], click [Parallel] in the [Printer type] list, and then click
[Communication].
O
Click [Manual load] in the [Communication type] area, and then click [OK].
Check the settings, and then click [OK].
P
Set up the network connection to a print server. Select a context specified
6
using NIB Setup Tool, and then click [Create] on the [Object] menu.
Q
In the [Class of new object] box, click [Print Server], and then click [OK]. For
NetWare 5, click [Print Sever (Non NDPS)].
R
In the [Print Server Name] box, enter the print server name.
S
Select the [Define additional properties] check box, and then click [Create].
T
Assign the printer to the created print server. Click [Assignments], and then
click [Add] in the [Assignments] area.
U
In the [Available objects] box, click the queue you created, and then click [OK].
V
In the [Printers] area, click the printer you assigned, and then click [Printer
Number].
W
Enter the printer number, and then click [OK]. Check the settings, and then
click [OK].
X
Start the print server by entering the following from the console of the Net-
Ware server.
If the print server is in operation, quit and restart it.
❖ To exit
CAREE: unload pserver
❖ To start
CAREE: load pserver "print_server_name"
252