Installing The Postscript 3 Printer Driver (Windows Xp, Windows Server 2003) - Savin MLP145 Operating Instructions Manual

Preparing for Printing
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003)
1
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer attached to this computer], and then click [Next >].
G
Select the port you want to use, and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
H
Select the name of the printer whose driver you want to install, and then
click [Next >].
I
Click [Close] to close the [Printer Port] dialog box.
J
Click [Next >].
K
Change the printer name if you want, and then click [Next >].
L
Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
M
Restart the computer to complete installation.
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
❒ A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.
48