Setting Up As A Remote Printer (Netware 4.X, 5/5.1, 6/6.5) - Savin MLP145 Operating Instructions Manual

Setting up using Web Image Monitor
A
Start Web Image Monitor.
B
Click [Login].
A dialog box for entering the [Login User Name] and [Login Password] appears.
C
Enter the login user name and password, and then click [Login].
For details about the login name and password, consult your network admin-
istrator.
D
Click [Configuration] in the left area, and then click [NetWare Print Settings].
E
Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
F
Click [Logout].

Setting Up as a Remote Printer (NetWare 4.x, 5/5.1, 6/6.5)

Follow the procedure below to use the printer as a remote printer under Net-
Ware 4.x, 5/5.1 and 6.
Important
❒ To use the printer as a remote printer under NetWare 4.x/5/5.1, set it to NDS
mode.
❒ Do not use the printer as a remote printer when Pure IP is used.
Setting up using NWadmin
A
From Windows, start NWadmin.
For details about NWadmin, see the NetWare manuals.
B
Set up the network connection to a print queue. Select the object in which
the print queue is located in the directory tree, and then click [Create] on the
[Object] menu.
C
In the [Class of new object] box, click [Print Queue], and then click [OK].
D
In the [Print Queue Name] box, enter the name of the print queue.
E
In the [Print Queue Volume] box, click [Browse].
F
In the [Available objects] box, click the volume in which the print queue is
created, and then click [OK].
G
Check the settings, and then click [Create].
Using NetWare
6
251