Using Pure Ip In The Netware 5/5.1 Or 6/6.5 Environment - Savin MLP145 Operating Instructions Manual

F
Click [Logout].
Note
❒ To check that the configuration is made correctly, enter the following from
the command prompt.
F:> NLIST USER/A/B
❒ If the printer works as configured, the name of the print server appears as
a connected user.
❒ If you cannot identify the printer you want to configure, check the printer
name with the configuration page printed from the printer. For details about
printing a configuration page, see p.130 "Printing a Configuration Page".
❒ If no printer names appear in the list, match the frame types of IPX/SPXs
for the computer and printer. Use the [Network] dialog box of Windows to
change the frame type of the computer.
Reference
When using the printer in a pure IP environment of NetWare 5/5.1 or Net-
Ware 6.0/6.5, see p.247 "Using Pure IP in the NetWare 5/5.1 or 6/6.5 En-
vironment".

Using Pure IP in the NetWare 5/5.1 or 6/6.5 Environment

Follow the procedure below to connect the printer as a print server in a pure IP
environment of NetWare 5/5.1.
Important
❒ When creating a queued print server in a pure IP environment of NetWare
5/5.1 or NetWare 6.0, create a print queue on the file server using NetWare
Administrator.
❒ This printer is not available as a remote printer for use in a pure IP environ-
ment.
❒ To use the printer in a pure IP environment, set it to TCP/IP.
Setting up using NWadmin
A
From Windows, start NWadmin.
For details about NWadmin, see the NetWare manuals.
B
Select the object in which the print queue is located in the directory tree,
and then click [Create] on the [Object] menu.
C
In the [Class of new object] box, click [Print Queue], and then click [OK].
D
In the [Print Queue Name] box, enter the name of the print queue.
E
In the [Print Queue Volume] box, click [Browse].
Using NetWare
6
247