Savin MLP145 Operating Instructions Manual page 151

❖ Energy Saver
You can specify the number of minutes Energy Saver mode is applied.
❖ E. Saver On/Off
You can specify whether or not to switch Energy Saver.
• On
• Off
Note
❒ Default: On
❒ When the printer switches to Energy Saver mode, the Power indicator
is unlit, but the Online indicator remains lit.
❖ E. Saver Timer
You can select the lead time needed to switch to the Energy Saver mode.
The Energy Saver mode reduces electric power consumption.
• 1 minute
• 5 minutes
• 15 minutes
• 30 minutes
• 45 minutes
• 60 minutes
Note
❒ Default: 1 minute
❖ Auto Reset Time
❖ Auto Reset
Specify whether to revert to the initial configuration at certain interval.
This also specifies the interval to reset the configuration.
• On
• Off
Note
❒ Default : Off
❖ Reset Time
• 10 to 999 sec by 1 sec.
Note
❒ Default : 60 seconds
System Menu
4
139