Dhcp - Savin MLP145 Operating Instructions Manual

dhcp

Use the "dhcp" command to configure DHCP settings.
❖ View settings
The following command displays the current DHCP settings.
msh> dhcp
❖ Configuration
You can configure DHCP.
msh> dhcp "interface_name" {on|off}
• Click {on} to enable DHCP. Click {off} to disable DHCP.
• If the DNS server address and domain name are obtained from DHCP, be
sure to click {on}.
• wlan can be specified only when the IEEE 802.11b interface unit and the
optional SDRAM module are installed.
Interface name
ether
wlan
❖ Current interface priority configuration display
msh> dhcp priority
❖ Interface priority configuration
msh> dhcp priority "interface_name"
• You can select which interface has DHCP parameter priority.
• Priority settings are available when multiple interfaces are installed.
❖ DNS server address selection
msh> dhcp dnsaddr {dhcp | static}
• Specify whether to obtain the DNS server address from the DHCP server
or use the address set by a user.
• To obtain the DNS server address from the DHCP server, specify "dhcp".
To use the address set by a user, specify "static".
❖ Domain name selection
msh> dhcp domainname {dhcp | static}
• Specify whether to obtain the domain name from the DNS server or use the
domain name set by a user.
• To obtain the domain name from the DHCP server, specify "dhcp". To use
the domain name set by a user, specify "static".
Remote Maintenance by telnet
Interface configured
Ethernet interface
IEEE 802.11b interface
5
191