Maintenance Menu; Changing The Maintenance Menu - Savin MLP145 Operating Instructions Manual

Maintenance Menu

You can set printing conditions such as density and calibration, and printer
management such as formatting the optional hard disk unit.

Changing the maintenance menu

This section explains changing the maintenance menu using examples.
HD Format
Follow the procedure below to set HD Format.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {T} or {U} key to display [Maintenance], and then press the {q Enter}
key.
C
Press the {T} or {U} key to display [HD Format], and then press the {q Enter}
key.
D
Read the HD format confirmation message, and then press the {q Enter}
key.
The hard disk unit is formatted, and the message appears.
E
Press the {q Enter} key.
The [HD Format] screen appears.
F
Press the {On Line} key.
The initial screen appears.
Note
❒ The [HD Format] menu appears only when the optional hard disk is in-
stalled.
Reference
For details about the optional hard disk unit, see Hardware Guide.
Maintenance Menu
133
4