Ps Menu Parameters - Savin MLP145 Operating Instructions Manual

Making Printer Settings Using the Control Panel

PS Menu parameters

This section explains about parameters that can be set on the Postscript menu.
❖ Data Format
You can select the data format.
• Binary Data
• TBCP
This setting is effective when using a parallel, USB, or EtherTalk connection.
When you use a parallel or USB connection, the print job is canceled if binary
data is sent from the printer driver.
When you use an Ethernet connection, the print job is canceled if:
• The printer driver data format is TBCP and the data format selected using
4
the control panel is Binary Data.
• The printer driver data format is binary and the data format selected using
the control panel is TBCP.
Note
❒ Default: TBCP
❖ Resolution
You can select the resolution.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
154