Devicename - Savin MLP145 Operating Instructions Manual

Monitoring and Configuring the Printer
❖ Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname | location}
• cname
Reset the computer name. The default computer name will be displayed
when the computer is restarted.
• location
Reset the location information. The previous location information will be
deleted.
❖ Interface configuration
msh> bonjour linklocal "interface_name"
• If many types of interface are installed, configure the interface that com-
municates with linklocal address.
• If you do not specify an interface, the Ethernet interface is automatically se-
lected.
5
• wlan can be specified only when the IEEE 802.11b interface unit and the
optional SDRAM module are installed.
Interface
ether
wlan

devicename

Use the "devicename" command to display and change the printer name.
❖ View settings
msh> devicename
❖ Printer name configuration
msh> devicename name "string"
• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.
❖ Printer name initialization
msh> device name clearname
• Reset the printer name to its default.
190
Interface configured
Ethernet interface
IEEE 802.11b interface