User Code - Savin MLP145 Operating Instructions Manual

Mac OS Configuration
Deleting all Stored Print files
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Stored Print], and then press the {q En-
ter} key.
C
Press the {U} or {T} key to display [Del. All Files], and then press the {q En-
ter} key.
The user ID and the time when the job was stored appear.
Depending on the security settings, certain print jobs may not be displayed.
D
Press the {U} or {T} key to confirm deleting all files, and then press the {q
Enter} key.
To cancel deleting a Stored Print file, press the {Escape} key.
If you set the password in the printer driver, enter the password to delete.
If you forget your password, ask your network administrator for help.
E
Press the {q Enter} key.
F
Press the {On Line} key.
The initial screen appears.

User Code

8
Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users
and allows you to check the number of sheets printed under each code with
SmartDeviceMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Mac OS
Mac OS X
284
Select the [Enable User Code] check box, and then enter a
user code in the [User ID:] box on [Job Log] in the print di-
alog box.
Select the [Enable User Code] check box, and then enter a
user code in the [User ID:] box on [Job Log] in the print di-
alog box.