Table of Contents
Advertisement
Getting Printer Information over the
Network
This section explains details of each item displayed in the printer status and in-
formation.
Current Printer Status
The printer status can be checked using the following commands:
• UNIX: Use the "lpq" command and "rsh", "rcp", "ftp" and "sftp" parameters.
• mshell: Use the "status" command.
Messages
Access Restricted
Add staples (Booklet: Back)
Add staples (Booklet: Both)
Add staples (Booklet: Front)
Adjusting...
Call Service Center
Canceled
Canceling Job...
Key Card/Counter not inserted
Coin or amount not inserted
Coin/Key Counter not inserted
Configuring...
Cooling Down Fusing Unit...
Cover Open: ADF
Cover Open: Bridge Unit Center
Cover Open: Bridge Unit Left
Cover Open: Bridge Unit Right
Cover Open: Duplex Unit
Cover Open: Duplex Unit Left
Cover Open: Duplex Unit Right
Cover Open: Finisher
Cover Open: Finisher Front
Cover Open: Front Cover
Getting Printer Information over the Network
Description
The job was canceled because user have no au-
thority.
The staple of booklet finisher (back) is exhaust-
ed.
The staple of booklet finisher is exhausted.
The staple of booklet finisher (front) is ex-
hausted.
The printer is initializing or calibrating.
There is a malfunction in the printer.
The job is reset.
The job is being reset.
The printer is waiting for prepaid card or key.
The printer is waiting for coin to be inserted.
The printer is waiting for coin or key counter.
Setting is being changed.
Fusing unit is cooling down.
The document feeder is open.
The center cover of Bridge Unit is open.
The left cover of Bridge Unit is open.
The right cover of Bridge Unit is open.
The cover of the duplex unit is open.
The left cover of the duplex unit is open.
The right cover of the duplex unit is open.
The cover of Finisher is open.
The front cover of Finisher is open.
The front cover is open.
5
219
Advertisement
Table of Contents
