Savin MLP145 Operating Instructions Manual page 271

ftp
Use the "put" or "mput" command according to the number of files to be printed.
❖ When one file is printed
ftp> put \pass name\file name [option]
❖ When multiple files are printed
ftp> mput \pass name\file name [\pass name\file name...]
[option]
A
Formulate the printer's IP address or the host name of the hosts file printer
as an argument and use the "ftp" command.
% ftp printer's IP address
B
Enter the user name and password, and then press the {OK} key.
For details about the user name and password, consult your network admin-
istrator.
User:
Password:
C
When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
D
Specify files to be printed.
The following shows the examples of printing a PostScript file named "file 1"
in the "C:\PRINT" directory and printing file 1 and file 2.
ftp> put C:\PRINT\file1 filetype=RPS
ftp> mput C:\PRINT\file1 C:\PRINT\file2
E
Quit ftp.
ftp> bye
Note
❒ "=", ",", "_", and ";"cannot be used for filenames. File names will be read
as option strings.
❒ For "mput" command, option can not be defined.
❒ For "mput" command, "*" and "?" can be used as wild cards in file names.
❒ When printing a binary file in ASCII mode, print may not come out correctly.
Printing Files Directly from Windows
7
259