List/Test Print Menu Parameters - Savin MLP145 Operating Instructions Manual

Making Printer Settings Using the Control Panel
❖ Host Interface
Settings made on the [Host Interface] menu are displayed.
When DHCP is active on the network, the IPv4 address, subnet mask and
gateway address appear in parentheses on the configuration page.
Reference
For details, see p.144 "Host Interface menu parameters".
❖ Interface Information
Interface information is displayed.

List/Test Print menu parameters

This section explains about parameters that can be set on the List/Test Print
4
menu.
❖ Multiple Lists
You can print the configuration page and error log, network summary and
supply list.
❖ Config. Page
You can print the current configuration of the printer.
❖ Error Log
You can print an error report.
❖ Network Summary
You can print the network device status.
❖ Menu List
You can print a menu list showing all available menus.
❖ PCL Config.Page
You can print the current configuration and installed PCL font list.
❖ PS Config. Page
You can print the current configuration and installed PostScript font list.
❖ PDF Config.Page
You can print the current configuration and installed PDF font list.
❖ Hex Dump
You can print the data sent by the computer using Hex Dump.
❖ Operations Test
Use this to check the printer and its options for operability, including paper
feed and output, punching and stapling. Only settings of installed options are
displayed. If a specified function fails, the printer displays a message and
stops printing. If the test is successful, the printer prints black frames.
132