Table of Contents
Advertisement
Making Printer Settings Using the Control Panel
List/Test Print Menu
You can print lists of configurations on printer or the paper printings.
Also, you can check the types and characters of all the printable fonts.
Printing a Configuration Page
Follow the procedure below to print the configuration page.
Important
❒ The configuration page is printed on A4 or Letter (8
load them in the same paper tray.
A
4
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {T} or {U} key to display [List/Test Print], and then press the {q
Enter} key.
C
Press the {T} or {U} key to display [Config. Page], and then press the {q En-
ter} key.
The configuration page is printed. The [Config. Page] menu screen returns on
completion of printing.
D
Press the {On Line} key.
The initial screen appears.
Interpreting the configuration page
❖ System Reference
❖ Printer ID
The serial number assigned to the board by its manufacturer is displayed.
❖ Total Memory
The total amount of SDRAM installed on the printer is displayed.
❖ Pages Printed
The total number of pages printed by the printer to date is displayed.
❖ Firmware Version
• Firmware
The version number of the printer controller firmware is displayed.
• Engine
The version number of the printer engine firmware is displayed.
• NCS
The version number of the network interface board is displayed.
130
" × 11") size paper, so
1
/
2
Advertisement
Table of Contents
