Snmpv3 Encryption - Savin MLP145 Operating Instructions Manual

Appendix

SNMPv3 Encryption

This can be specified by the network administrator.
When using SmartDeviceMonitor for Admin or another application to make
various settings, you can encrypt the data transmitted.
By making this setting, you can protect data from being tampered with.
Specify the SNMPv3 encrypted communication mode using Web Image Moni-
tor.
A
Log on to Web Image Monitor in the administrator mode.
B
Click [Configuration].
C
Click [Network Security] in the "Security" area.
D
Click [Ciphertext Only] in the "Permit SNMPv3 Communication" area in the
"SNMP" area, and then click [OK].
E
Quit Web Image Monitor.
Note
❒ To use SmartDeviceMonitor for Admin for encrypting the data for speci-
fying settings, you need to specify the network administrator's [Encryption
Password] setting and [Encryption Key:] in [SNMP Authentication Information] in
SmartDeviceMonitor for Admin, in addition to specifying [Permit SNMPv3
Communication] on the printer.
❒ If network administrator's [Encryption Password] setting is not specified, the
data for transmission may not be encrypted or sent.
Reference
9
For details about specifying [Encryption Key:] in SmartDeviceMonitor for
Admin, see the SmartDeviceMonitor for Admin Help.
310