Changing To Ethertalk - Savin MLP145 Operating Instructions Manual

G
Double-click the [TrueType] or [Type1] folder.
Select the font type you want to use.
H
Copy the fonts you want to install in [Fonts] under [System Folder].
A confirmation message appears.
I
Click [OK].
The fonts are installed.
J
Restart the Mac OS.

Changing to EtherTalk

Follow the procedure below to configure to a Mac OS to use EtherTalk.
A
Open [Control Panel], and then double-click the AppleTalk icon.
B
On the [Connect via:] pop-up menu, click [Ethernet].
C
If you change zones, select a name on the [OK] pop-up menu.
D
Close the AppleTalk control panel.
E
Restart the computer.
Note
❒ The procedures used to configure Mac OS may vary depending on the Mac
OS version. The following describes how to configure Mac OS 9.1. If you
are using a different version of Mac OS, use the following procedures as a
reference and see the manuals for your Mac OS version.
❒ Confirm the Connection to the Printer with TCP/IP.
Reference
For information about installing applications required for EtherTalk, see
the Mac OS manuals.
Mac OS
8
265