Savin MLP145 Operating Instructions Manual page 318

Appendix
Creating and Installing the Self-Signed Certificate
Create and install the server certificate using Web Image Monitor.
This section explains the use of a self-certificate as the server certificate.
A
Log on to Web Image Monitor in the administrator mode.
B
Click [Configuration], and then click [Device Settings] in the "Security" area.
C
Click [Create].
D
Make the necessary settings.
E
Click [OK].
The setting is changed.
F
Click [OK].
A security warning dialog box appears.
G
Check the details, and then click [OK].
[Installed] appears under [Certificate Status] to show that a server certificate for
the printer has been installed.
H
Quite Web Image Monitor.
Note
❒ Click [Delete] to delete the server certificate from the printer.
Reference
For details about the displayed items and selectable items, see Web Image
Monitor Help.
9
Creating the Server Certificate (Certificate Issued by a Certificate Authority)
Create the server certificate using Web Image Monitor.
This section explains the use of a certificate issued by a certificate authority as
the server certificate.
A
Log on to Web Image Monitor in the administrator mode.
B
Click [Configuration], and then click [Device Certificate] in the "Security" area.
The [Device Settings] page appears.
C
Click [Request].
D
Make the necessary settings.
E
Click [OK].
[Requesting] appears for [Certificate Status] in the [Device Certificate] area.
306