Savin MLP145 Operating Instructions Manual page 268

Special Operations under Windows
When setting the IPv4 address of a printer using DHCP
Use the printer name on the configuration page as the host name.
Reference
For details about printing a configuration page, see p.130 "Printing a Config-
uration Page".
In other cases
Add the IPv4 address and host name of the network printer to the hosts file on
the computer used for printing. Methods of addition vary depending on operat-
ing systems.
Windows 95/98/Me
A
Copy WINDOWSHOSTS.SAM to the same directory and name it
"HOSTS" with no extension.
B
Open the "WINDOWSHOSTS" file created using memo pad files, for in-
stance.
C
Add an IP address and host name to the hosts file using the following format:
7
192.168.15.16 host
"192.168.15.16" is the IPv4 address, "host" is the printer's host name, and
"#NP" is replaced by comments. Insert a space or tab between "192.168.15.16"
and "host", between "host" and "#NP" respectively, using one line for this
format.
D
Save the file.
Windows 2000/XP, Windows Server 2003, Windows NT 4.0
A
Open the hosts file using memo pad files, for instance.
The hosts file is in the following folder:
WINNTSYSTEM32DRIVERSETCHOSTS
"WINNT" is the directory of the installation destination for Windows
2000/XP, Windows Server 2003, and Windows NT 4.0.
B
Add an IPv4 address and host name to the hosts file using the following
format:
192.168.15.16 host
"192.168.15.16" is the IPv4 address, "host" is the printer's host name, and
"#NP" is replaced by comments. Insert a space or tab between "192.168.15.16"
and "host", between "host" and "#NP" respectively, using one line for this
format.
256
# NP
# NP