Savin MLP145 Operating Instructions Manual page 160

Making Printer Settings Using the Control Panel
❖ Trans. Speed
You can select the transmission speed for IEEE 802.11b.
• Auto
• 11 Mbps
• 5.5 Mbps
• 2 Mbps
• 1 Mbps
Note
❒ Default: Auto
❖ SSID
You can set an SSID in the infrastructure mode and the 802.11 Ad hoc
4
mode.
• View
• Enter ID
Note
❒ Default: blank (ASSID)
❒ Select [?] to enter [/] for the SSID. Also, [¥] appears when printing the
configuration page, read it as [/].
❒ Characters used are ASCII 0x20-0x7e (32 bytes).
❒ An SSID is set automatically to the nearest access point if no SSID has
been set.
❒ If no SSID has been set for the 802.11 ad hoc mode, an SSID is set auto-
matically and the same SSID is used for the 802.11 ad hoc mode and the
infrastructure mode.
❒ If blank is specified in SSID for 802.11b adhoc mode or adhoc mode,
"ASSID" appears.
❒ An SSID can also be set using Web Image Monitor. For details, see Web
Image Monitor Help.
❖ Security Method
You can enable or disable encryption. You can also specify the security
type when the encryption is enabled.
• None
• WEP
Change (HEX), Change (ASCII)
• WPA
Encrypt. Meth. (TKIP, CCMP(AES)), Authent. Meth. (WPA-PSK,
WPA(802.1X)), PSK Entry
148