Form Feed; Printing From A Selected Tray - Savin MLP145 Operating Instructions Manual

Form Feed

This section gives instructions for operating the printer when there is no tray for
the selected paper size or type, or when paper loaded in the printer has run out.
Important
❒ The tray cannot be changed if the following functions are set:
• Duplex Print to a tray that does not support duplex printing
• Cover Sheet
• Slip Sheet
Note
❒ If form feed is selected for a tray with the following settings, you can change
the tray by canceling the settings:
• Duplex Print
Reference
If Auto Continue is selected, form fed paper is printed after a set interval. For
details, see p.136 "Auto Continue".

Printing from a Selected Tray

If the printer does not have a tray for the selected paper size or paper type, or if
the selected paper loaded in the printer has run out, a caution message appears.
If this message appears, do the following procedure.
A
Press the {Form Feed} key, and then select the paper tray on the screen.
B
Press the {q Enter} key.
The job is printed from the selected tray.
Note
❒ If a tray with a smaller paper size is selected, the print job may be cut short,
or other problems may occur.
Form Feed
3
103