Reference
For details about where to store the certificate when accessing the printer
using IPP, see the SmartDeviceMonitor for Client Help.
Setting the SSL / TLS Encryption Mode
By specifying the SSL/TLS encrypted communication mode, you can change the
security level.
❖ Encrypted Communication Mode
Using the encrypted communication mode, you can specify encrypted com-
munication.
Ciphertext Only
Ciphertext Priority
Ciphertext/Clear Text
Setting the SSL / TLS Encryption Mode
This can be specified by the network administrator.
After installing the server certificate, specify the SSL/TLS encrypted communi-
cation mode. By making this setting, you can change the security level.
Specify the SSL/TLS encrypted communication mode using Web Image Moni-
tor.
A
Log on to Web Image Monitor in the administrator mode.
B
Click [Configuration].
C
Click [SSL/TLS] in the "Security" area.
D
Select the encryption communication mode in the "Permit SSL/TLS Com-
munication" list, and then click [OK].
Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext/Clear Text] as the en-
crypted communication mode.
E
Quit Web Image Monitor.
Protection Using Encryption
Allows encrypted communication only.
If encryption is not possible, the printer does
not communicate.
Performs encrypted communication if en-
cryption is possible.
If encryption is not possible, the printer com-
municates without it.
Communicates with or without encryption,
according to the setting.
9
309