Setting Up As A Remote Printer (Netware 3.X) - Savin MLP145 Operating Instructions Manual

Setting up using Web Image Monitor
A
Start Web Image Monitor.
B
Click [Login].
A dialog box for entering the [Login User Name] and [Login Password] appears.
C
Enter the login user name and password, and then click [Login].
For details about the login name and password, consult your network admin-
istrator.
D
Click [Configuration] in the left area, and then click [NetWare Print Settings].
E
Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
F
Click [Logout].

Setting Up as a Remote Printer (NetWare 3.x)

Follow the procedure below to use the printer as a remote printer under Net-
Ware 3.x.
Setting up using PCONSOLE
A
Enter "PCONSOLE" from the command prompt.
F:> PCONSOLE
B
Create a print queue.
When using the existing print queue, go to the procedure for creating a printer.
C
From the [Available Options] menu, select [Print Queue Information], and then
press the {Enter} key.
D
Press {Insert} key, and then enter a print queue name.
E
Press {Esc} key to return to the [Available Options] menu.
F
Set up the network connection to a printer.
G
On the [Available Options] menu, click [Print Server Information], and then press
the {Enter} key.
H
To create a new print server, press the {Insert} key, and then enter a print
server name.
For a currently defined print server, select a print server in the [Print Server]
list.
Using NetWare
6
249