Table of Contents
Advertisement
Other Print Operations
Stored Print Job to the Printer
The following procedure describes how to print a Stored Print file with the PCL
6/5e, RPCS and Postscript 3 printer driver. For information about how to print
a Stored Print file with the PostScript 3 printer driver, see Supplement included.
Important
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
A
From an application, select a command to print.
3
The [Print] dialog box appears.
B
Select the printer you want to use in the [Name] list, and then click [Properties].
C
Start printing from the application's [Print] dialog box.
You can select two ways for Stored Print:
• [Sample Print]
Stores the file in the printer and print it later using the control panel.
• [Store and Normal Print] (or [Store and Print])
Prints the file at once and also stores the file in the printer.
For details about configuring the printer drivers, see the relevant Help files.
D
Click [Details...], and then enter a User ID in the [User ID:] box.
You can also set a password. The same password must be entered when print-
ing or deleting.
You can set a file name. The file name you set will be displayed on the print-
er's Job List screen.
E
Execute a command to print.
The Stored Print job is sent to the printer and stored.
Printing a Stored Print File
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Stored Print], and then press the {q Enter}
key.
C
Press the {U} or {T} key to display [Print One File], and then press the {q
Enter} key.
The file name and the time when the job was stored appear.
To cancel printing, press the {Escape} key.
100
Advertisement
Table of Contents
