Snmp Configuration On The Mobile Computer; Management Information Base - Intermec 730 User Manual

SNMP Configuration on the Mobile Computer

700 Series Color Mobile Computer User's Manual
the settings you can configure with the Intermec Settings applet is in the
Intermec Computer Command Reference Manual (P/N: 073529) available
online at www.intermec.com.
Information about the SmartSystems Foundation is available as an online
help within the SmartSystems Console application. Select SmartSystems >
Help in the console to access the manual.
See the Data Collection Resource Kit in the IDL for information about
data collection functions. The IDL is available as a download from the In-
termec web site at www.intermec.com/idl. Contact your Intermec repre-
sentative for more information.
Tap Start > Settings > the System tab > the Intermec Settings icon to ac-
cess the applet, then tap to expand the SmartSystems Information option.
In short, SNMP is an application-layer protocol that facilitates the ex-
change of management information between network devices. The 700
Color Computer is such an SNMP-enabled device. Use SNMP to control
and configure the 700 Color anywhere on an SNMP-enabled network.
The 700 Color supports four proprietary Management Information Bases
(MIBs) and Intermec provides SNMP support for MIB-II through seven
read-only MIB-II (RFC1213-MIB) Object Identifiers (OIDs).
Note: You can only query these seven OIDs through an SNMP manage-
ment station.

Management Information Base

The Management Information Base is a database that contains information
about the elements to be managed. The information identifies the manage-
ment element and specifies its type and access mode (Read-Only, Read-
Write). MIBs are written in ASN.1 (Abstract Syntax Notation.1) — a ma-
chine independent data definition language. Note: Elements to be managed
are represented by objects. The MIB is a structured collection of such objects.
Chapter 4 — Network Support
157