Configuring The Ck30 With The Setup Assistant - Intermec CK30 User Manual

Configuring the CK30 With the Setup Assistant

When first setting up the CK30, use the Setup Assistant to set or
enable basic network parameters and connect your CK30 to the
network. The Setup Assistant is a wizard that guides you
through setting the following basic network parameters:
• Date and time
• SSID (Network name)
• 802.1x security
• DHCP server or IP address, subnet mask, and default router
• Primary and secondary DNS addresses
• Primary and secondary WINS addresses
• Device name
To set other parameters, use the Configuration Utility or
another configuration method. The Setup Assistant runs on the
CK30 the first time you turn on the computer.
The first screen of the Setup Assistant Wizard
However, if you exit Setup Assistant before you are finished
configuring the CK30, you can restart it from the S S ystem Main
Menu. See the next section for information on how to access the
System Main Menu.
After you complete the Setup Assistant, the CK30 should be
communicating with your network. If you are using RF
communications on your CK30, a network connection icon
appears in the status bar.
CK30 Handheld Computer User's Manual
Chapter 2 — Configuring the CK30
27