Backup/Restore Command Messages; Information; Error - Fujitsu iScanner fi-6010N Operator's Manual

E.3.4 Backup/Restore Command Messages
Backup/restore command messages which may appear during central admin operations can be
arranged into the following two categories:

• Information

• Error

Backup/restore command messages will be shown on the command prompt.
■ Information
Code
0A040001
0A040002
0A040003
0A040004
■ Error
Code
7A040010
7A040011
7A040012
7A040013
Message
Starting backup.
Finishing backup.
Starting restore.
Finishing restore.
Message
iScanner Central Admin is not
installed.
Backup folder has not been
specified.
Backup folder does not exist.
Backup folder contents are
invalid.
Action
No action required.
Action
Central Admin Server software is not
installed.
Try again in a Central Admin Server that
has been correctly installed.
The backup file name is not specified in
the parameters of the backup command and
restore command.
Specify the backup file, and try again.
Specify the backup folder that was speci-
fied with the backup command, and try
again.
Or, check the read privilege for the speci-
fied backup folder.
The backup folder specified in the parame-
ter for the restore command is not a backup
folder for Central Admin.
Specify the Central Admin backup folder
and try again.
fi-6010N Network Scanner Operator's Guide
E
517