Sensor Error; Optical Error (Adf Front); Optical Error (Adf Back) - Fujitsu SP-1130Ne Operator's Manual

Sensor Error

If a sensor error occurs, the indicators on the operator panel lights up as follows.
Check Indicator
Flashes
Take the following measures.
● Clean the ultrasonic sensors by referring to
● Turn the scanner off then back on.
If the problem still persists, write down the status of the indicators, check each item in
Scanner Service Provider (page 114)
Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.

Optical error (ADF Front)

If an optical error occurs in the front of the ADF, the indicators on the operator panel light up as follows.
Check Indicator
Flashes 2 times
Take the following measures.
● Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 70)
● Turn the scanner off then back on.
If the problem still persists, write down the status of the indicators, check each item in
Scanner Service Provider (page 114)
Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.

Optical error (ADF Back)

If an optical error occurs in the back of the ADF, the indicators on the operator panel light up as follows.
Check Indicator
Flashes 3 times
Take the following measures.
● Refer to Cleaning the Inside of the Scanner (ADF) with a Cloth (page 70)
● Turn the scanner off then back on.
If the problem still persists, write down the status of the indicators, check each item in
Scanner Service Provider (page 114)
Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
Power Indicator
On
Cleaning the Inside of the Scanner (ADF) with a Cloth (page
and then contact the distributor/dealer where you purchased this product.
Power Indicator
On
and then contact the distributor/dealer where you purchased this product.
Power Indicator
On
and then contact the distributor/dealer where you purchased this product.
91
Troubleshooting
Before You Contact the
and clean the glass.
Before You Contact the
and clean the glass.
Before You Contact the
70).