Command Syntax - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

Notation
This manual uses the following fonts and symbols to express specific types of information.
Font or
symbol
italics Title of a manual that you should refer to
[ ]
Window names as well as the names of
buttons, tabs, and drop-down menus in
windows are enclosed in brackets.
Notation for the CLI (command line interface)
The following notation is used for commands.

Command syntax

The following notation is used for commands.
- Variables requiring the entry of a value are enclosed in angle brackets < >.
- Optional elements are enclosed in brackets [ ].
- Options for optional keywords are grouped in | (stroke) separated lists enclosed in brackets [ ].
- Options for required keywords are grouped in | (stroke) separated lists enclosed in braces { }.
Command syntax is written in a box.
Remarks
The command output shown in the PDF manuals may include line feeds at places where there is no line feed
symbol (\ at the end of the line).
Notes on notations
- In this manual, the Management Board and MMB firmware are abbreviated as "MMB."
- In this manual, IOBs and GSPBs (LIOBs and LGSPBs within partitions) are collectively referred to as IO
Units.
- Screenshots contained in this manual may differ from the actual product screen displays.
- The IP addresses, configuration information, and other such information appearing in this manual are display
examples and differ from that displayed during actual operation.
Meaning
viii
Example
See the PRIMEQUEST 1000 Series
Installation Manual (C122-E107EN).
Click the [OK] button.