Enabling Bios - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

2.2.7 Enabling BIOS

Enable the HBA BIOS so that the HBA can recognize the LUNs of the SAN storage unit and to enable the
system to be started from one of them.
1. As shown in FIGURE 2.16 HBA setup utility, select [1. Enable or Disable BIOS], and then press the [Enter]
key.
2. When the screen displays the [Disabled] and [Enabled] options, select [Enabled] and then press the [Enter]
key.
FIGURE 2.17
Enabling BIOS
(1)
28